Made With The World Best Materials
Photo By Pascal Shirley
Photo by Pascal Shirley
15D Silicone / PU HyBrid coated Ripstop Nylon
HB stands for HyBrid
Contents of the Khafra HB Kit
Khafra HB (the fly shelter), Khafra HB Full Mesh Inner, DAC Stake S 16pcs (each packed in sack)
Khafra HB (the fly shelter)
Size : L 280cm x W 280cm x H 170cm (≈ 110.6″ x 110.6″ x 66.9″)
Packed Size : L 30cm x Dia. 12cm (≈ L 11.81″ x Dia. 4.72″)
Weight : 650g (≈22.9 oz.)
Fabric : 15D Silicone / PU HyBrid coating Ripstop Nylon
Color : Tan
- Dual Peak Vents in Front and Rear, covered with no-see-um mesh
- Catenary Curved ridge lines
- 9 tie-outs with Dyneema Reflective Guy-lines and Line-Locks pre-attached in the perimeter
- ４ tie-outs with Dyneema Reflective Guy-lines and Mini Line-Locks pre-attached on each panel
- ４ tie-outs with Dyneema Reflective Guy-lines and Mini Line-Locks pre-attached on each ridge line
- Loops both inside and outside of the apex
- Waterproof 2way zipper with 2 of Double Slider with the pullers, allows to open /close from both sides of top and bottom
- Door catches on each side of the front panel
- Fully seam taped
- 16pcs of DAC S stakes included.
Khafra HB Full Mesh Inner
Size : L 245cm x W 245cm x H 170cm (≈ L 96.46″ x W 96.46″)
Packed Size : L 31cm x Dia. 12cm (≈ L 12.20″ x Dia. 4.72″)
Weight : 560g (≈ 19.75 oz.)
Upper : No-See-Um Mesh, Color：Black
Bathtub Floor : 15D Silicone / PU HyBrid coating Ripstop Nylon, Color：Tan
- Inverted T Zipper with door catches on each side of the front panel
- Catenary Curved ridge lines
- 4 corner tie-outs with Dyneema Reflective Guy-lines and Line-Locks pre-attached
- Center of floor of pole contact point reinforced
- Seam taped on the floor
Khafra HB Options
Color : Gold
Size : 169cm〜197cm (adjustable), 48cm (folded)
Weight : 364g
The aluminum pole made for Locus Gear shelters by EASTON USA. Suitable for Apollo and Khafra.
It is flexibly adjustable in its length with a ring stopper and inner tube.
All-weather shock cord for use in harsh conditions. Used exclusively in military survival shelters.The coating in its surface is hard anodized.
High grade 7075-T9 aerospace aluminum for weight-saving strength.
Khafra HB Footprint
Material : 15D Silicone / PU HyBrid Coating Ripstop Nylon
Color : Black
Weight : 260g (≈9..17 oz)
Size : L 245cm x W 245cm (≈L 96.46″ x W 93.46″)
Packed Size：L 22cm x W 13cm (≈ L 8.66″ x W 5.12″)
＜About the footprint＞
We suggest to use a ground sheet or the footprint under the inner shelter for not only protecting the floor material, but also keeping the shelter as clean as possible, which makes easy to maintain and keep the shelter itself in good condition. Washing the sheet is much easier than washing the mesh inner which is quite delicate.
Schedule to release at July
*Please note that the colors in the photos might look differently from the originals caused by the weather condition and the reflection of light etc.
**Prices and details are subject to change without notice.